Pet Strappy Dress Pattern Generator

Position the strappy body and skirt from body measurements

The strappy dress uses chest, neck, back length and front-leg gap. These measurements establish the upper body and openings, after which the pattern derives the straps and single skirt panel from the body attachment geometry; there is no separate strap-length input.

Record your pet's actual measurements first, then consider the stretch of your chosen fabric. Stretchier fabric may call for an adjustment to circumference inputs; do not scale back length or leg gaps along with them. See the measurement guide below for measuring methods and stretch-fabric guidance.

Review strap orientation and the skirt seam

In the preview, check front-back strap orientation, left-right pairing, front-leg openings and the skirt attachment length, as well as coverage near the tail. Do not change neck circumference to compensate for strap position; recheck front-leg gap and back length first.

Observe strap tension during the test fit

Strap width, fabric stretch and skirt weight work together to affect stability. Test in material close to the final behaviour and check whether the straps slip, tighten or pull the skirt forward while the pet walks and turns.

Each payment includes two PDF exports for the same pattern style. Make a test garment after the first export. If a measurement was wrong or the fabric stretch makes the fit too loose or tight, recheck and adjust the relevant measurements, then use the remaining export for the revised pattern.